Aspire - Nautilus AIO Pod Kit
The Aspire Nautilus AIO:
The Aspire Nautilus AIO kit was designed for the fans of the Nautilus range of tanks. Aspire now brings us the brand new, Nautilus AIO pod kit, designed to be slim and stylish, coming in 6 popular colours such as blue, jade, silver, black, red and purple. The Nautilus AIO features a 2ml easy-fill pod system and uses the famous Nautilus BVC coils which are rated at 1.8 Ohms and comes with a second coil, specially designed for nicotine salt e-liquids. Small and discrete, the Nautilus AIO fits perfectly in the hand and is easy to carry.
The Aspire Nautilus AIO, ergonomic, palm-sized design allows it to fit well into pocket or purse for easy transportation.
The Nautilus AIO is very minimal in parts and pieces, ensuring a little chance of the kit failing.
The Aspire Nautilus AIO atomizer is the famous and popular Nautilus BVC coil, it also uses nichrome wire. The Aspire Nautilus AIO comes supplied with two coils both rated at 1.8 ohms, one for regular e-liquid and one for use with nicotine salts, though it works equally well with normal e-liquid.
The famous BVS atomizer heads are the powerhouse of the Nautilus AIO kit, now included is a Nichrome variation. First seen in the original Nautilus, the two BVC coils are supplied with the tank and are rated at 1.8 Ohms. Whether you like regular or salt nicotine, the BVC coils are there to power you through.
The Nautilus AIO pods are very simple to use, filled from the bottom using a simple yet effective rubber plug covering the Pod’s 4.6mm hole, to keep the liquid in and allow the user to fill with every type of bottle nozzle.
Pressing the two side buttons releases the pod from the device. Simply turn the pod upside down, push down on the airflow ring and unscrew it completely to disengage it. Then, remove the coil completely and replace it with a new one whilst replacing the airflow component too. Once done, replace the pod onto the Nautilus AIO until you hear it click.
Pod Refilling couldn’t be any easier, simply remove the pod from the device using the two tabs and flip the pod upside down. Remove the silicone plug which reveals the 4.6mm filling hole, insert a bottle and squeeze. Once the pod is filled, replace silicone plug onto the pod and then insert the pod onto the device. Once it clicks, you are ready to vape.
Charging the Nautilus AIO is just as easy, simply plug in the included micro USB cable into the port on the side of the device and attach the USB cable to a power source. The maximum charge current can reach 1A. When the device is charging, the LED’s will flash blue and orange three times, signifying this. Once the device is fully charged, the LED’s will flash blue and orange twenty times and then turn off.
1 x Nautilus AIO device
2 x 1.8 Ohm coils (1 regular and 1 for nic salt)
2 x Extra o-rings
1 Silicone Seal
1 x Micro USB Cable
1 x Warranty Card
1 x User Manual
Output Wattage: 12 Watts
Battery Capacity: 1000mAh
Coil compatibility: Aspire Nautilus BVC coils
Pod E-Liquid Capacity: 2ml
Filling type:Bottom Fill Pods
For information regarding our terms and conditions for warranty please click here. There you will find warranty information for all of our products.