Your Questions Answered:
Q: I am a beginner, what is the best kit for me?
A: Your first kit should a a simple one. This will allow you to understand and get used to it's functionality, without being overpowered by things such as Variable Wattage, Temperature Control and other functions available on devices today. The Aspire Pockex is a great kit for beginners as it is both simple, small in form factor and above all portable so you will never be caught without a vape when you want one.
Q: Do all coils fit all tanks?
A: Some manufacturers design their tanks to use the same replacement coils across their entire range however, this is not always the case and in fact it's pretty rare. We recommend making a note of your tanks coil compatibility in order to purchase the correct coils.
Q: What makes a sub ohm tank?
A: First of all, let's clarify what Ohms are. An ohm is the measure of electrical resistance of the coil inside an atomizer or tank. It is normally shown using this symbol - Ω. The more wraps a coil has and the thinner said wire is, the higher the resistance and fewer, thicker wraps of wire tend to be a lower resistance. Any atomizer coil with a resistance bellow 1.00 ohms such as (0.50, 0.15, etc.) is a sub ohm coil.
Q: My coils are burning out far too quickly, why is this happening?
A: Coils can burn out for various reasons. This can be due to the coils not being fully saturated with e-liquid when originally primed, or by using the coil at too high a wattage. Most coils have a wattage range displayed on the side, and it is advised that you stay within this range to prolong the life of the coils. Chain vaping is also another factor that can contribute to this as you are not allowing the coil to re-saturate with e-liquid, therefore vaping on a dry coil.
Q: What’s the difference between voltage and wattage?
A: Voltage is the direct current given out by the battery and the wattage is the measure of power distributed to the coil from the battery. Wattage can be changed easily using a variable wattage device. More importantly, Voltage will take all the set power the user has defined in the menu and send all of it through the coil. Variable Wattage on the other hand uses the coil's resistance as a guideline and takes the Ohms into consideration, ensuring too much power is not sent to the coil causing it to fail. VW is used in every single regulated device today as it is the most popular form of adjustment.
Aspire Pockex Pocket AIO
At only 11.77 cm in length the Pockex Kit from Aspire is shorter than an iPhone 5s in length and is a the ultimate pocket all in one (AIO) vaping device. Using a 0.6 ohm stainless steel U-Tech coil, this makes the pockex a starter kit that is a sub ohm styled vape device. The Pockex has a discreet size and low profile sub ohm vapour production and features a wider drip tip and larger top airflow allowing for an increase in vapour production.
The Aspire Pockex is discrete in size and has a low profile vapour production which makes the Pockex your must-have vape while indoors or on the go.
Aspire Pockex Dimensions:
Battery capacity: 1500mAh / Bypass Output
Compact in size with dimensions of 11.77cm x 1.97cm allow you to easily slide the Pockex into any pocket or bag. The Pockex is one of the shortest tube shaped pocket AIO’s offering superb flavour and dense vapour production.
Aspire Pockex Exploded View
The Pockex comes in 6 colour options which are Matte Black, Rose Gold, Pantone White, Stainless Steel, Blue and Rainbow giving you plenty of choice to pick the right one for you.
Aspire Pockex Atomizers:
The Pockex utilises Aspire’s U-Tech coil technology, specially designed to ensure a better vaping experience. There are 2 different resistances that the coils are available in to suit you vaping preference. The 0.6 ohm SS316L (Stainless Steel) coil is good for both vapour and flavour production while the 1.2 ohm coils is an ideal choice if you prefer to use higher nicotine content in your e-liquid.
Aspire Pockex Top-Fill Tank:
The Pockex introduces a top-fill system in an innovative new way. The atomizer head (coil) screws into the top cap instead of the bottom. This does allow you to replace the atomizer without draining the e-liquid contained in the tank. The Pockex’s top fill design allows you to drip, drop or pour e-liquid into the 2ml TPD compliant tank.
Pockex Top-Filling instructions:
Unscrew and remove the top cap
2. Squirt your favourite vape juice into the tank (Please ensure that you do not fill above the maximum fill line).
Screw the top cap back into place on the tank.
Please note: When using the atomizer for the first time, make sure to allow the e-liquid to saturate the cotton wick inside the tank before use. This should normally take around 4 - 5 minutes depending on the ratio of the e-liquid.
Aspire Pockex Contents:
1 x Pockex AIO Kit (0.6Ω Atomizer Pre-installed), 1 x Replacement Atomizer (1.2 ohm), 1 x Micro-USB Cable, 1 x user Manual, 1 x Warranty Card