Aspire - Tigon Vape Kit
Introducing the all Aspire Tigon Vape Kit, an easy to use, compact device which comes in four stylish colours. It can be used as an MTL (mouth to lung) or a restricted DTL (direct to lung) Device and comes in a with a long-lasting built-in 1800mAh battery and is By-Pass mode compatible. You can rest assured that this great performing, everyday compact device is Aspire's first product to use a sealed design, which will seal the wicking holes in the tank when the coil is removed.
If you require the replacement coils for this tank, they are available in a pack of 5 Here
The Tigon Kit by Aspire is an all new pen style e cig kit. The Tigon is a simple to use, child safe, compact vaping device from Aspire. The Tigon is available in the 4 stylish colours of Stainless Steel, Blue, the ever popular Rainbow and black. It can be used as an MTL (mouth to lung) or a restricted DTL (direct to lung) vape. It comes with a long lasting inbuilt 1800mAh battery and works in "bypass mode". Whichever colour preference you have, you can be sure of a great performance from this everyday compact vaping device perfectly pocket sized or will fit in your handbag perfectly. The Tigon is the first Aspire product with a new innovative technology which will seal the wicking holes in the tank when the coil is removed too.
The Aspire Tigon Kit comes supplied with a choice of 2 replacement mouthpieces. The longer one is for a mouth to lung (MTL) style of inhaling and the slightly shorter and wider bore “stubby” style drip tip is more suited to restricted direct to lung (DTL) draws.
Filling the tank could not be more simple in a child-proof/leak proof tank like this one. First, you need to pull upwards on the top cap, then with your thumb or finger on the marker, slide the top cap horizontally to reveal the silicon leak-proof seal of the fill port. The silicon fill port on the TPD version (2ml) has a self-sealing valve, into which you can insert the nozzle of your chosen e-liquid flavour to fill the tank. To close and completely seal the tank it is the same actions but in reverse. You would need to slide the top cap back into place covering the silicon seal and push downwards.
Remember though, when using a new coil, that you will need to prime the coil before use and leave it to saturate in the e-liquid for between 5 - 10 minutes or so before you start vaping. This will ensure the cotton in the coil is fully saturated and you would not get any dry hits or damage the coil.
On the Aspire Tigon tank, coil replacement is just a simple case of unscrewing the base hardware, pulling out the old coils and replacing it with a brand new one. Then screw back the base hardware on again. Note that the Tigon tank can still hold your e-liquid when changing the coil, this is due to the wicking holes being covered by a spring-loaded sleeve that will slide shut, sealing the holes, when the coil is removed.
Remember, before using a new coil for the first time to leave it to stand for 5 - 10 minutes after filling with e-liquid to saturate and avoid damaging the coil or getting dry hits.
TPD Version Glass Tube Removal and Installation
When removing and/or replacing the glass tube on the childproof TPD version of your Tigon tank, you need to follow these following steps.
Firstly, unscrew and remove the base hardware and remove the coil. Then, invert the tank and using the special key provided, unlock the top part of the tank by placing it in the slot of the screw holding the top together (see diagram). Next, remove the glass tube and follow the steps in reverse, (it is simpler to place the screw on to the key first to locate it into the top of the tank), secure the screw, insert the coil and the screw the base of the tank back into place.
Ingenious self-sealing coil and housing
This is the first Aspire product to use the ingenious design which seals your tank’s wicking holes when the coil is removed.
The Tigon Kit contains:
1 x Tigon Kit (2.0ml) / 1 x Glass tube / 1 x Extra drip tip / 2 x Coils（1 x 0.4Ω pre-installed & 1 x 1.2Ω） / 10 x O-rings / 1 x Warranty Card / 1 x Screw adjustment tool / 1 x User Manual / 1 x USB Cable
1 x Tigon Kit(2.0ml)
1 x Glass tube
1 x Extra drip tip
1 x 0.4Ω Coil (preinstalled)
1 x 1.2Ω Coil
10 x O-rings
1 x Warranty Card
1 x Screw adjustment tool
1 x User Manual
1 x USB Cable
Charging light indicator (Tri-Colour)
Sealed E-Liquid System
Battery Capacity: 1800mAh
22.3mm x 123mm
Leak proof design
2ml capacity - TPD compliant
Built-In Childproof Safety Features
Short Circuit Protection
Low Voltage Protection
Over Heat Protection
Aspire Tigon Coils (0.4Ω - 1.2Ω)
Press Fit Coils
Easy Fill Top Cap
For information regarding our terms and conditions for warranty please click here. There you will find warranty information for all of our products.