Type of Tanks
For this article it's all about different tanks and the coils that work best within them. There are hundreds of different tank variations that are available and these fall into one of the two categories, which I have listed below and will go into more detail about them.
This article will answer some of your most pressing questions and help you choose whether starting or upgrading your vape kit to a sub-ohm vaping kit is the right move for you. Here at UK ECIG STORE, we focus on serving customers who vape in the UK and the rest of the world, as a matter of fact, so we feel it's our duty to say, switching to vaping is one of the best moves you can do, for a couple of reasons.
Tobacco Cigarettes or traditional cigarettes are not only incredibly bad for your health, but once you read up on the 4000 plus hazardous, harmful chemicals in the smoke you inhale, you'll agree too!
With that being said, I know it's repetitive but we all know that these products are intended for the use of people kicking a habit and are not intended for the use of anyone under the age of 18, if you are pregnant or breastfeeding etc. Now that's out of the way, let's focus on the matter at hand.
One thing you should note from the beginning is that the ratio between VG (Vegetable Glycerine) and PG (Propylene Glycol) in your vape liquid will affect your chosen tank's performance. you can find out more about this by reading the Beginners Guide to Sub-Ohm Vaping article.
Mouth to lung (MTL) Tanks
Mouth to lung tanks (cigarette style) are usually the starting point for most people who are looking to switch from smoking to vaping. The MTL style of tank is perhaps the most popular in the vaping industry and have a similar style of inhaling to smoking a cigarette. This is why people who are kicking the habit of smoking, find they work really well for them and also why they are called "starter kits" or "e cig kits".
The inhale style of a mouth to lung tank would be that when the e-cigarette is used and you take a puff, the vapour would be taken and held in the mouth before then inhaling into your lungs. This style of vaping tends to work best with MTL tanks as they tend to be used at lower power and will give a harsher throat hit. The throat hit simulates the “feeling of smoking” and depending on the level of nicotine within the e-liquid, it can be increased or decreased accordingly. This makes someone's ability to stop smoking so much easier.
The coils within the mouth to lung tanks would be any atomizer coil that has a resistance of 1.0 ohm (Ω) or above. For example, a 1.8Ω coil would be perfect for a new vaper as this would give a good amount of flavour and vapour whilst allowing them to ease into vaping, so to speak. The tank I would personally recommend would be the Aspire Nautilus Mini Tank which has been on the market for around four years and is still regarded as one of the best, if not the best MTL tank available.
There are a lot of people (who are not new vapers) that prefer to use mouth to lung tanks as they do not produce as much vapour as a sub ohm tank and are more sociable to use when out and about. Mouth to lung style of tanks are also increasing in popularity since they work perfectly with cannabidiol (CBD) e-liquids. Due to CBD e-liquid being a reasonably new product that is available and is a product that comes in many forms and people use for its’ health benefits.
Direct to Lung (DTL) Sub-Ohm Tanks
Sub ohm tanks (DTL) are the number one choice for a huge amount of vapers worldwide, who are constantly searching for one of many things such as, the largest possible tank capacity, the longest coil life possible, the best flavour production and finally, the largest vapour production to name a few.
So what makes a tank “sub ohm”?
It really comes down to the resistance of the coil that is inside the tank. If the coil is below 1.0 ohm (Ω), it is considered a Sub-Ohm coil/tank. The coils would need to be used at a higher wattage than MTL coils and due to the two factors of lower resistance and higher power. The coils will heat up quicker and produce more vapour. Needless to say that this would also increase the amount of e-liquid vaporized and you will find that you will go through more e-liquid than a MTL tank variant.
When using a sub ohm tank, it is normally advised to reduce the nicotine content in your e-liquid roughly by half compared to the level of nicotine you would use in an MTL tank. For example, I can comfortably use 6mg in a MTL tank however, with a sub ohm tank I would use 3mg of nicotine due to the power increase and the lower resistance. With this, I can achieve roughly the same amount of nicotine intake as I would using double to amount of nicotine in an MTL device based on the increased volume of vapour I inhale.
So now you are equipped with all of the information needed, why not have a look at the selection of tanks we have here.
If you ever need more information or advice we are always happy to help, so please feel free to send us a message, or come and see us at either our Fleet Street, Camden Town or Wembley stores or if it is easier to give our customer services team a ring on 0203 475 4885 and they will be happy to help.