Smok - Mag Kit

Availability: In stock

Lock n Load! - Simply pull the trigger to vape. This 225w device is sure to turn a few heads, the beautiful colour OLED displays all the necessary information with the option to set your own colour preference. This device is built for power. Included in this kit is the TFV12 Prince tank, featuring the cobra resin drip tip and a patented locking mechanism for the top fill cap.

Powered by 2 x 18650 batteries (not included)

£57.99
- +

Buy Together

  • Add 2 x 18650
    Smok - Mag Kit
    x1
    +
    Vaping Outlaws Vape Cell 18650 25A 2500mAh Battery
    x2
    Vaping Outlaws Vape Cell 18650 25A 2500mAh Battery
    £7.99
    An impressive 18650 battery from Vaping Outlaws. A 25amp high discharge battery which is perfect for your chosen device, be it mechanical or variable. Great for sub-ohming.

    PLEASE NOTE: All 18650 batteries are provided with a complimentary UK ECIG STORE battery cover.

    £73.97 £71.97

    13% discount on accessories -£2.00 buying this bundle

Vape Kits

Features

  • 25mm Tank

  • Sub Ohm

  • Usb Charging

  • X2 Battery



Your Questions Answered:

Q: Do all coils fit all tanks?

A: Some manufacturers design their tanks to use the same replacement coils across their entire range however, this is not always the case and in fact it's pretty rare. We recommend making a note of your tanks coil compatibility in order to purchase the correct coils.

Q: What makes a sub ohm tank?

A: First of all, let's clarify what Ohms are. An ohm is the measure of electrical resistance of the coil inside an atomizer or tank. It is normally shown using this symbol - Ω. The more wraps a coil has and the thinner said wire is, the higher the resistance and fewer, thicker wraps of wire tend to be a lower resistance. Any atomizer coil with a resistance bellow 1.00 ohms such as (0.50, 0.15, etc.) is a sub ohm coil.

Q: What is the temperature control range on a device?

A: Some mods have temperature control modes - the range shows the temperature that the coils will heat up to when the product is in use. This is normally between 200°C- 250°C / 392°F – 480°F although it tends to vary from manufacturer to manufacturer. The great thing about a temperature control mod, is the ability to fine tune the best temperature for a coil. For instance, a temperature can be set for a particular coil and the device will do it's best to stay within that set temperature range. Some vapers enjoy a cooler or warmer vape and the TC mode allows them to fine tune their vape.

Q: What’s the difference between voltage and wattage?

A:Voltage is the direct current given out by the battery and the wattage is the measure of power distributed to the coil from the battery. Wattage can be changed easily using a variable wattage device. More importantly, Voltage will take all the set power the user has defined in the menu and send all of it through the coil. Variable Wattage on the other hand uses the coil's resistance as a guideline and takes the Ohms into consideration, ensuring too much power is not sent to the coil causing it to fail. VW is used in every single regulated device today as it is the most popular form of adjustment.
Contents
1 x Smok Mag Mod
1 x Smok TFV12 Prince EU Tank
1 x Smok TFV12 V12 Prince-Q4 0.4Ω Quadruple Coil (Pre-Installed)
1 x Smok TFV12 V12 Prince-T10 0.12Ω Decuple Coils
1 x USB Cable
1 x User Manual
1 x Screwdriver
1 x Bag of spare parts

Features

Smok Mag Mod
92mm Height
65mm Width
30mm Depth
Wattage Range: 6W - 225W
Temperature Control Range: 200°F - 600°F / 100°C - 315°C
Resistance Range:
VW: 0.1Ω - 3Ω
TC: 0.05Ω - 3Ω

Smok TF12 Prince EU Edition
2ml Capacity
25.5mm Diameter
63mm Height
510 Threaded Connection
810 Drip Tip
Click-to-Fill top fill system
Cobra Resin Drip Tip

Warranty
For information regarding our terms and conditions for warranty please click here. There you will find warranty information for all of our products.

Write a review

Your Rating*

  • What you need to know


    Your Questions Answered:

    Q: Do all coils fit all tanks?

    A: Some manufacturers design their tanks to use the same replacement coils across their entire range however, this is not always the case and in fact it's pretty rare. We recommend making a note of your tanks coil compatibility in order to purchase the correct coils.

    Q: What makes a sub ohm tank?

    A: First of all, let's clarify what Ohms are. An ohm is the measure of electrical resistance of the coil inside an atomizer or tank. It is normally shown using this symbol - Ω. The more wraps a coil has and the thinner said wire is, the higher the resistance and fewer, thicker wraps of wire tend to be a lower resistance. Any atomizer coil with a resistance bellow 1.00 ohms such as (0.50, 0.15, etc.) is a sub ohm coil.

    Q: What is the temperature control range on a device?

    A: Some mods have temperature control modes - the range shows the temperature that the coils will heat up to when the product is in use. This is normally between 200°C- 250°C / 392°F – 480°F although it tends to vary from manufacturer to manufacturer. The great thing about a temperature control mod, is the ability to fine tune the best temperature for a coil. For instance, a temperature can be set for a particular coil and the device will do it's best to stay within that set temperature range. Some vapers enjoy a cooler or warmer vape and the TC mode allows them to fine tune their vape.

    Q: What’s the difference between voltage and wattage?

    A:Voltage is the direct current given out by the battery and the wattage is the measure of power distributed to the coil from the battery. Wattage can be changed easily using a variable wattage device. More importantly, Voltage will take all the set power the user has defined in the menu and send all of it through the coil. Variable Wattage on the other hand uses the coil's resistance as a guideline and takes the Ohms into consideration, ensuring too much power is not sent to the coil causing it to fail. VW is used in every single regulated device today as it is the most popular form of adjustment.
  • Detailed product specs
    Contents
    1 x Smok Mag Mod
    1 x Smok TFV12 Prince EU Tank
    1 x Smok TFV12 V12 Prince-Q4 0.4Ω Quadruple Coil (Pre-Installed)
    1 x Smok TFV12 V12 Prince-T10 0.12Ω Decuple Coils
    1 x USB Cable
    1 x User Manual
    1 x Screwdriver
    1 x Bag of spare parts

    Features

    Smok Mag Mod
    92mm Height
    65mm Width
    30mm Depth
    Wattage Range: 6W - 225W
    Temperature Control Range: 200°F - 600°F / 100°C - 315°C
    Resistance Range:
    VW: 0.1Ω - 3Ω
    TC: 0.05Ω - 3Ω

    Smok TF12 Prince EU Edition
    2ml Capacity
    25.5mm Diameter
    63mm Height
    510 Threaded Connection
    810 Drip Tip
    Click-to-Fill top fill system
    Cobra Resin Drip Tip

    Warranty
    For information regarding our terms and conditions for warranty please click here. There you will find warranty information for all of our products.
  • Reviews 2

    Write a review

    Your Rating*

Staff Review

The Smok Mag Kit

Overview:

The Smok Mag Kit doesn’t just reset the bar, it places it so high that no one can touch it. Let’s get down to it and talk about why.


Personal opinion:

My first thoughts when this device landed on my desk a few weeks ago were pretty mixed, due to the device featuring a gun-grip like appearance. However, there are a lot of cool features to be seen on this mod. Firstly, the kit comes with the Baby Prince Sub Ohm Mesh tank which you may have seen in the promo video. It’s amazing on its own but couple that with the unusual but immensely satisfying “magazine” release button, click and trigger-like fire button which makes you feel like John McClane every time you replace your batteries is something no other device has shown me in the past. A fun, new way of interacting with your Mod.

Besides all that, the ergonomics of the mod are some of the best! The finger grooves in the device allow your hand to grasp it in the most natural way possible. Everything else is within reach too, such as the “magazine release” button and fire button. On top of that, the styling has a hint of futuristic, simplistic and utilitarian design, all perfectly balanced together.

Moving away from the looks if you can, i have one gripe with this device and it’s the power up/down buttons. For some reason, they are inverted and I can't find a way to put them in the right order and trust me, several of us have tried… But brings us to the performance. 225w with temperature control is nothing short of awesome!

Having the capability to fire down to around 0.1 ohms, all the way up to 3 just makes me giddy. It means I can run my super low , brutal drippers and then switch to the baby prince for a more sophisticated vape sort of feels like I’m carrying a swiss army knife, ready for anything!


Conclusion:

The point of all of this to show the versatility of this device and the things you can achieve with it. Granted, not everyone is going to care for its looks and even more people don't need its outstanding performance, however, you'll be glad you got one, I know I am!


Tips: I always recommend carrying around a few spare batteries and a bottle of juice, since devices like these are thirsty for both juice and power.  


Air Flow
Build Quality
Cloud Production
Ease Of Use
Ergonomics
Functions
Juice Efficiency
Ramp Up Time
Flavour Production
Vapour Production
By Yianno