YIHI SX350 30W CHIP

Availability: Out of stock
The second generation Vapor intelligent Chip. Made for DIY electronic cigarette Mod builders. The SX350 is designed to handle 30 watts from as low as 0.2ohms.
£44.99
Accessories

Contents
1 x SX350 CHIP By YiHi

Features
5W-35W Variable Wattage
1.5V-9.5V Variable Voltage
Handles 0.2 ohm- 3.0 ohm Atomizer
The Output Volt can be Increased or Decreased
By-pass (direct connection) mode, if you choose this mode its like a mechanical mod
Gravity Sensor changes the power automatically
0.66" OLED Screen
Output Power: Min: 5 Watts max: 30 Watts
Output Voltage Min: 1.0 volts Max: 9.5 volts
Output Current Max:12.5A
Atomizer Resistance: Min: 0.2ohms Typical: 2.0ohms Max: 3.0ohms
Input Voltage: Min: 3.2V Typical: 3.7V Max: 4.5V

Warranty
1. If you're not skilled, experienced or comfortable with Electronics or soldering, you should not be purchasing this chip! It is intended for experienced individuals only
2. You MUST CHECK THE BOARD WHEN YOU RECEIVE IT and prior to installation. Any board that has been installed and/or soldered on has voided ANY and ALL warranty claims.
3. All the boards are pre-wired. Removing anything (including the screen, black glue, soldering joints of all wires etc.) voids warranty.

Write a review

Your Rating*

  • Detailed product specs

    Contents
    1 x SX350 CHIP By YiHi

    Features
    5W-35W Variable Wattage
    1.5V-9.5V Variable Voltage
    Handles 0.2 ohm- 3.0 ohm Atomizer
    The Output Volt can be Increased or Decreased
    By-pass (direct connection) mode, if you choose this mode its like a mechanical mod
    Gravity Sensor changes the power automatically
    0.66" OLED Screen
    Output Power: Min: 5 Watts max: 30 Watts
    Output Voltage Min: 1.0 volts Max: 9.5 volts
    Output Current Max:12.5A
    Atomizer Resistance: Min: 0.2ohms Typical: 2.0ohms Max: 3.0ohms
    Input Voltage: Min: 3.2V Typical: 3.7V Max: 4.5V

    Warranty
    1. If you're not skilled, experienced or comfortable with Electronics or soldering, you should not be purchasing this chip! It is intended for experienced individuals only
    2. You MUST CHECK THE BOARD WHEN YOU RECEIVE IT and prior to installation. Any board that has been installed and/or soldered on has voided ANY and ALL warranty claims.
    3. All the boards are pre-wired. Removing anything (including the screen, black glue, soldering joints of all wires etc.) voids warranty.

  • Reviews

    Write a review

    Your Rating*