Vandy vape have brought back the mesh wire, which could be controversial, but they have nailed it in terms of practicality. This is a return to the classic rebuildable atomizer, but also can be used on single and dual coil.


What you get in the box:

  • 1 x Vandy Vape mesh RDA

  • 1 x Pre-installed Ultem drip tip

  • 1 x Derlin doc drip tip

  • 1 x Spare parts bag

  • 3 x Kanthal A1 Mesh Wire

  • 3 x Ni80 Mesh Wire

  • 3 x SS316 Mesh Wire

  • 1 x User manual.


Tech Specs:

  • 24mm diameter, 25mm in height (without the drip tip).

  • Postless build deck.

  • Available in mesh, single and dual coil.

  • Adjustable airflow for single and dual coil.  


Personal opinion:

There are different types of mesh wire included, but i prefer the Kanthal A1 because it runs on wattage mode. The flavour from the mesh is different than, say, fused Clapton coils. I feel it gives me a much smoother, richer taste rather than a standard 6 wrap coil. The mesh ramps up in power fairly quickly and did give me a warmer vape.


Conclusion:

I would recommend this RDA as it's probably the best mesh RDA out there at the moment.


Tips:

If building with mesh wire make sure the arch is as small as possible by cutting about 7mm off so that the cotton touches the arch of the mesh. If you are using Kanthal mesh, vape between 60-80 watts as it can burn out your cotton quick if a higher power is used.