Uwell - Nunchaku E-Cigarette Starter Kit
The Uwell Nunchaku Stick Mod is a 80w variable wattage pen style vape kit which comes in multiple finishes and utilises external 18650 batteries. The kit comes with the Nunchaku tank which features plug and pull style coils, making changing the coils easier and mess free. The separate condensation holder makes the tank easier to clean and the Pro-FOCS technology utilised promises some of the most amazing flavour to date. The thing which surprised us the most however was the full CNC body which was machined instead of cast like most other mods. As understated as this may seem, it's a big deal and speaks to the quality of the device as CNC machining is a feature on all high end mechanical mods and seemed to vanish from the mass mod market. More importantly, the UWell Nunchaku kit has a tonne of usability, including temperature control, 80w of power and not to mention the UWell Nunchaku tank which we think as one of the best, with coils so easily easily replaceable all it takes is a simple pull.
Add a batteryx1+x1Vaping Outlaws Vape Cell 18650 25A 2500mAh Battery
An impressive 18650 battery from Vaping Outlaws. A 25amp high discharge battery which is perfect for your chosen device, be it mechanical or variable. Great for sub-ohming.
PLEASE NOTE:All 18650 batteries are provided with a complimentary UK ECIG STORE battery cover.
All Vaping Outlaws Vape Cell 18650 25A 2500mAh batteries are shipped with an included hard plastic battery case
Before using an external battery we would ask you to read our Battery Safety Guide
13% discount on accessories -£1.00 buying this bundle
Your Questions Answered:
Q: Do all coils fit all tanks?
A: Some manufacturers design their tanks to use the same replacement coils across their entire range however, this is not always the case and in fact it's pretty rare. We recommend making a note of your tanks coil compatibility in order to purchase the correct coils.
Q: What makes a sub ohm tank?
A: First of all, let's clarify what Ohms are. An ohm is the measure of electrical resistance of the coil inside an atomizer or tank. It is normally shown using this symbol - Ω. The more wraps a coil has and the thinner said wire is, the higher the resistance and fewer, thicker wraps of wire tend to be a lower resistance. Any atomizer coil with a resistance bellow 1.00 ohms such as (0.50, 0.15, etc.) is a sub ohm coil.
Q: What is the temperature control range on a device?
A: Some mods have temperature control modes - the range shows the temperature that the coils will heat up to when the product is in use. This is normally between 200°C- 250°C / 392°F – 480°F although it tends to vary from manufacturer to manufacturer. The great thing about a temperature control mod, is the ability to fine tune the best temperature for a coil. For instance, a temperature can be set for a particular coil and the device will do it's best to stay within that set temperature range. Some vapers enjoy a cooler or warmer vape and the TC mode allows them to fine tune their vape.
Q: What’s the difference between voltage and wattage?
A: Voltage is the direct current given out by the battery and the wattage is the measure of power distributed to the coil from the battery. Wattage can be changed easily using a variable wattage device. More importantly, Voltage will take all the set power the user has defined in the menu and send all of it through the coil. Variable Wattage on the other hand uses the coil's resistance as a guideline and takes the Ohms into consideration, ensuring too much power is not sent to the coil causing it to fail. VW is used in every single regulated device today as it is the most popular form of adjustment.
1 x Uwell Nunchaku Mod
1 x Uwell Nunchaku Sub Ohm Tank
1 x Quartz Glass
1 x Uwell Nunchaku 0.25Ω Clapton Coil (Pre-Installed)
1 x Uwell Nunchaku 0.4Ω Clapton Coil
1 x Bag of replacement O-Rings
1 x Micro USB Cable
1 x User Manual
1 x Drip Tip Cover
Uwell Nunchaku Mod
Wattage Range: 5W - 80W
Temperature Control Range: 200°F - 600°F / 100°C - 300°C
VW Mode: 0.1Ω - 3Ω
TC Mode: 0.1Ω - 1Ω
Bypass Mode: 0.1Ω - 0.5Ω
Requires Single 18650 Battery (Not Included)
4 Different Work Modes: Power Mode (VW), Ni Temp Mode (TC), SS Temp Mode (TC), Bypass Mode
Micro USB Port for Charging
Uwell Nunchaku Sub Ohm Tank
Stainless Steel and Quartz Glass Construction
Separate condensation holder
Easy to replace Plug-Pull coil system known from Crown 3 Mini Tank
For information regarding our terms and conditions for warranty please click here. There you will find warranty information for all of our products.
Write a review
Something you don't CNC anymore
When it comes to vaping gear, everyone knows i’m a specialist mod/ atomizer kind of guy. I built coils ever since i can remember and that’s the way i like it, uh-huh, uh-huh. Eventually though, i’ll come across something awesome and place everything to the side for it. In this case, it’s the Nunchaku by Uwell. Let’s get suck in!
I hardly use “out of the box” stuff because that's just how i roll. I have nothing against devices like these and they work fantastically but they are not for me, or so i thought. Recently, there’s been an uprising in “out of the box” devices that have caught my attention. This is one.
First off, the Nunchaku sub ohm tank is just a treat. Made of primarily stainless construction, like most sub ohm tanks nowadays it features an airflow control ring, top fill and a pyrex tank. Machining and quality wise, everything is superb as expected by a company like Uwell. The design of the tank itself is phenomenal. The version i reviewed was the all black version and it looks really cool, that has to be said. The tank itself is good but the really cool part are the coils this sucker uses. First off, they are not screw in coils. Yeah, i know, i know. Not screw in but press fit! This makes life so much easier. Be honest, how many times have you had a coil get stuck in your tank? That's right, a few times. Well, no more stuck coils thanks to Uwell. The coils are not bad either. Straight out of the box, the tank comes with a 0.25Ω clapton style coil installed in the tank and another 0.40Ω coil as a spare. Instead of 70-80 Watts, the coils are rated to be used at 40-50 Watts which is awesome since the coils are going to last a hell of a lot longer. And it’s not just for the Nunchaku coils, Uwell does this for all their coils so, props there.
Moving onto the device, it brings back memories. I can’t remember the last time i saw a regulated tube mod. If i can just backtrack to the quality for a second, the mod as well as the tank are both CNC steel. That’s what you’re buying folks and that was the way tube mods were made back in the day. Compared with other mods which are moulded out of zinc alloy, this is purely steel which, if i'm honest, you can feel the quality when you hold and use it. Engraving on this device is gorgeous and really pops in the light. It also features a gold 510 pin, micro usb charging port for people who don't have a battery charger and wattage control buttons. This truly is a brilliant kit can impress anyone and trust me when i say, it performs as good as it looks.
It’s a good idea to switch flavours every few days, in order to avoid vaper's tongue