Al Fakher Hypermax Prime 50K Prefilled Pod Kit
Al Fakher Hypermax Prime 50K Prefilled Pod Kit
Product Overview
Al Fakher Hypermax Prime 50K Prefilled Pod Kit
The Al Fakher Hypermax Prime 50K is a rechargeable prefilled pod kit built around a swappable Snap Dual pod module system. Rather than replacing the entire device when the e-liquid runs out, you retain the 1000mAh battery body and swap in a fresh pod module and two new 10ml prefilled refill containers from each replacement refill pack. The coil sits inside the module itself, so every swap brings a new coil and fresh liquid in one step. The result is a running cost-per-puff significantly lower than kits that are replaced in full.
Draw-activated firing, adjustable airflow, and a Silk Glow battery indicator keep day-to-day use straightforward. Al Fakher's Big Cloud v2.0 mesh coil and Flow Sense liquid control system sit at the core of the hardware, delivering consistent flavour and vapour output throughout each refill. The starter kit comes with ten flavour options, with 45 available across the wider refill pod range. All e-liquid in the sealed refill containers is UK TPD-compliant nicotine salt.
Key Features
- Snap Dual pod module system with coil housed inside the module, not the battery body
- Up to 50,000 puffs from a full kit with two 10ml refill containers (20ml total)
- 1000mAh rechargeable battery with USB-C Quick Charge 2.0
- Unlimited module swaps: keep the battery, replace the module and refill containers each time
- Big Cloud v2.0 mesh coil for even heat distribution and consistent vapour output
- Flow Sense smart liquid control to maintain steady wicking and prevent dry hits
- Adjustable airflow for MTL or RDL draw styles
- Draw-activated firing with no buttons or settings
- Silk Glow battery indicator illuminates on each inhale
- UK TPD-compliant nicotine salt e-liquid sealed in every refill container
- 10 flavours available in the starter kit; 45 across the full refill range
Hypermax Prime 50K Flavours
| Flavour | Flavour Description |
|---|---|
| Blue Razz Lemonade | A zesty burst of tangy blue raspberry swirled with sharp, sun-kissed lemonade. |
| Cool Mango | Ripe, juicy mango sweetness with a refreshing menthol finish. |
| Grape Mint | Bold, dark grape flavour lifted by a crisp, cooling mint breeze. |
| Gum Mint | Sweet bubblegum nostalgia paired with a clean, icy mint kick. |
| Lemon Lime Cherry Fizz | A sparkling trio of tart lemon, zesty lime, and sweet cherry that dances on the tongue. |
| Lemon Mint | Bright, citrusy lemon sharpened by a smooth, cool mint exhale. |
| Lush Ice | Succulent watermelon sweetness wrapped in a frosty, refreshing chill. |
| Magic Love | A mysterious, enchanting blend of sweet mixed berries with a smooth, fruity finish. |
| Peach Ice | Soft, sun-ripened peach drenched in a wave of icy coolness. |
| Two Apple | A crisp double-apple blend balancing the sweetness of red apple with the tartness of green. |
Battery & Charging
The Hypermax Prime 50K runs on a 1000mAh built-in battery charged via USB-C with Quick Charge 2.0 support. A Silk Glow display on the front of the device lights up with each draw to indicate the remaining charge level. Firing is draw-activated throughout, so there are no buttons to press and no modes to navigate.
Snap Dual Pod Module System
The Snap Dual system is the defining feature of the Hypermax Prime 50K and marks a significant change from the earlier Al Fakher 30K. On that device, the coil sat inside the battery body, meaning refill containers were purely liquid stores. On the Prime 50K, the coil is integrated into the pod module itself. When the two 10ml refill containers are exhausted, the entire module and containers are replaced as a unit using a fresh refill pack. This gives you a new coil, new liquid, and a fresh module on every swap, without replacing the battery body. There is no limit on the number of refill pack swaps, which keeps ongoing costs lower than kits replaced in their entirety.
The 50,000 puff figure is Al Fakher's stated maximum, achieved under controlled test conditions with short, consistent draws. In everyday use, actual puff count will vary depending on draw length, airflow setting, and vaping frequency.
Big Cloud v2.0 Mesh Coil & Flow Sense
Each pod module uses a mesh coil running Al Fakher's Big Cloud v2.0 technology. Mesh construction distributes heat evenly across a broader surface area compared to traditional round-wire coils, improving flavour consistency and producing a denser vapour output. Flow Sense works alongside the coil as a liquid regulation system, controlling the rate at which e-liquid feeds the wick to maintain steady saturation. This reduces the risk of dry hits and helps prevent the gurgling associated with over-saturated coils as the refill containers empty.
Airflow Adjustment
An adjustable airflow control on the pod module allows the draw resistance to be set between a tighter mouth-to-lung pull and a looser, more open restricted direct-lung draw. The setting can be changed at any time to suit personal preference or the flavour being used.
How to set up the Hypermax Prime 50K Kit
- Remove the pod module and the two 10ml refill containers from the packaging.
- Pull the small plastic plug from the base of each refill container.
- Snap both refill containers into the Snap Dual pod module.
- Remove the plastic safety clip from the side of the assembled module.
- Slide the module onto the battery body until it clicks into place.
- Press the mouthpiece down once to engage the system.
- Allow two to three minutes for the mesh coil to saturate fully, then inhale to begin vaping.
When both refill containers are empty, replace the module and containers with a fresh Al Fakher Hypermax Prime 50K refill pack. The battery body is retained.
