Vapor Flask Squonk + Radius Bottom Fed Edition Kit

Availability: Out of stock
The Squonk meets the Radius, and what a meeting it is. A great kit combination that is guaranteed to make you a happy vaper.
£319.98

Contents
1 x Vapor Flask Squonk DNA 40 2.1S
2 x Plastic Bottles
1 x USB Charger
1 x Cosmic Innovations / Vicious Ant RDA

Squonk Features
Squonking ability
Designed and Manufactured in the United States by Vapor Flask
Constructed from Solid 6061 Aluminum
Variable Wattage Device
Revised Stainless Steel 510 Connector
Spring-Loaded Brass Contact
Custom Milled Aluminum Buttons
Micro USB Charger
Pass-Through Capability
Ergonomic Design
Requires an 18650 battery
Top Mounted OLED Display
22mm Profile

Evolv Chip Features
Power Regulated Digital Switch-Mode DC-DC Converter Utilizes a Small OLED Screen
Wattage Control
Temperature Protection
Preheat
Step Up/Step Down Topology
Digital User Controls
Synchronous Rectification for Maximum Battery Life and Minimal Heat Generation
Output Power: 1 - 40 Watts
Output Voltage: 1 - 9.0 Volts
Output Current: 16.0 Amps Max
Atomizer Resistance, Standard Wire: 0.16 Ohm Min (0.7 Ohm Typical) up to 2.0 Ohms Max
Atomizer Resistance, Temperature Sensing Wire, Cold: 0.10 Ohm Min (0.4 Ohm Typical) up to 1.0 Ohm Max
Input Voltage: 3.1 - 4.3 Volts
Input Current: 0.5 - 16 Amps

Radius Features
304 Stainless Steel
12.6mm Height
22mm Diameter
1.8mm x 8mm x2mm Air Flow Control
Peek Insulator
Dual and Single Coil Capable
Delrin Drip Tip
Tripole

Warranty
For information regarding our terms and conditions for warranty please click here. There you will find warranty information for all of our products.

Write a review

Your Rating*

  • Detailed product specs

    Contents
    1 x Vapor Flask Squonk DNA 40 2.1S
    2 x Plastic Bottles
    1 x USB Charger
    1 x Cosmic Innovations / Vicious Ant RDA

    Squonk Features
    Squonking ability
    Designed and Manufactured in the United States by Vapor Flask
    Constructed from Solid 6061 Aluminum
    Variable Wattage Device
    Revised Stainless Steel 510 Connector
    Spring-Loaded Brass Contact
    Custom Milled Aluminum Buttons
    Micro USB Charger
    Pass-Through Capability
    Ergonomic Design
    Requires an 18650 battery
    Top Mounted OLED Display
    22mm Profile

    Evolv Chip Features
    Power Regulated Digital Switch-Mode DC-DC Converter Utilizes a Small OLED Screen
    Wattage Control
    Temperature Protection
    Preheat
    Step Up/Step Down Topology
    Digital User Controls
    Synchronous Rectification for Maximum Battery Life and Minimal Heat Generation
    Output Power: 1 - 40 Watts
    Output Voltage: 1 - 9.0 Volts
    Output Current: 16.0 Amps Max
    Atomizer Resistance, Standard Wire: 0.16 Ohm Min (0.7 Ohm Typical) up to 2.0 Ohms Max
    Atomizer Resistance, Temperature Sensing Wire, Cold: 0.10 Ohm Min (0.4 Ohm Typical) up to 1.0 Ohm Max
    Input Voltage: 3.1 - 4.3 Volts
    Input Current: 0.5 - 16 Amps

    Radius Features
    304 Stainless Steel
    12.6mm Height
    22mm Diameter
    1.8mm x 8mm x2mm Air Flow Control
    Peek Insulator
    Dual and Single Coil Capable
    Delrin Drip Tip
    Tripole

    Warranty
    For information regarding our terms and conditions for warranty please click here. There you will find warranty information for all of our products.

  • Reviews

    Write a review

    Your Rating*